Shopping Cart
0
Item
Items
0 Item - 0,00 €
No products
To be determined
Shipping
0,00 €
Total
Product successfully added to your shopping cart
Quantity
Total
There are 0 items in your cart. There is 1 item in your cart.
Total products
(tax incl.)
Total shipping (tax incl.)
To be determined
Total
(tax incl.)
Welcome on our site,
we are official distributor of Gktech brand in Europe, we can provide stuff from another brands too, for example ARP, AP racing, Athena, RACEWARE, Exedy, Mishimoto, Wiseco, Tein, K1, Cometic, Kaaz, Akrapovic, BC Racing, DeatschWerks, Garrett, Borg Warner, ZRP, Supertech, CP – Carrillo, Pauter, Wagnertuning, Treadstone Performance, Plastigauge, HFM, DBA, Xtreme Clutch, Turbosmart, Hawk, Whiteline, Pedders, HKS, Milltek, JapanRacing, 6Boost, King Racing, Vibra-technics and more. If you are interest in something that you didn't find on our site, feel free to contact us. We still expanding our offer and adding products on our site.
‹
›
Skladom
Skladom
Skladom
Skladom
Skladom
In Stock
S13/180sx Radiator Cooling Panel
The GKTECH air diversion panels sit between your front bumper and the radiator support and not only make your engine bay look cleaner they also serve a purpose. The air diversion panels help to direct air into the radiator as opposed to around it and you will see a drop in water temperatures on the track (nothing to write home about but it all adds up)...
78,00 €
S13 Silvia / 180sx Replacement Overflow...
One of the most common problems with S13 silvias and 180sx's is cracked overflow bottles. GKTECH have made these to the highest standards and to be a direct replacement of your standard overflow bottle. Our overflow bottles are stronger than factory and are guaranteed to last the test of time! - 100% direct replacement of your standard overflow bottle -...
30,00 €
SR20DET Blow Off Valve return blocker
The SR20DET Blow Off Valve return blocker fits all S13, S14 and S15's and is to be used on the intake pipe when the standard blow off valve is removed. If the hole left from removing the blow off valve isn't removed, air will get sucked into the intake after the air flow meter and the car will run very rough. - 1 piece billet aluminium construction -...
11,58 €
Nissan 1.3kg/cm2 high pressure radiator cap
The GKTECH 1.3kg/cm2 high pressure radiator cap is a direct fit for all Nissans and raises the pressure in the coolant system to 1.3kg/cm2 (from 0.9 for most Nissans). Extra pressure allows for a higher boiling point = better cooling. NOTE: Do NOT remove your radiator cap while your car is hot. Vehicle Compatibility: - Nissan 180sx - Nissan S13 Silvia -...
10,80 €
S13/180sx/S14/R32 GTS-T/R34 GT-T Solid...
Replace your old worn factory shifter bushing and you will drastically improve the feel of your shifter. - Light weight aluminium bronze construction- Direct replacement of your plastic factory item
12,00 €
HFM 264° SR20DET CAM SHAFTS – S13, S14, S15
HFM have developed an excellent all round hydraulic forged cam shaft. Aggressive high ramp duration profile for added rpm. Slightly lumpy on idle with excellent power range from mid to top end. A simple drop in mod that will give great power gains. Advanced duration = 264°Duration @ 0.50 = 216°/216°11.9mm Valve liftManufactured from AISI 4140 heat treated...
403,20 €
Z našej ponuky
S13/180sx braided brake lines (Front &...
The GKTECH braided brake lines are a direct replacement of the factory lines and are stronger (read: more reliable) than the factory rubber lines which are prone to breaking but they also eliminate the spongy feel of the standard brake lines. The front lines are also longer to compensate for big brake setups or cars with more steering lock (which would...
105,00 €
S13/S14/S15 braided clutch line
The GKTECH braided clutch lines are a direct replacement of the factory lines and are stronger (read: more reliable) than the factory rubber lines which are prone to breaking but they also eliminate the spongy feel of the clutch. The line runs direct from the master cylinder to the slave. The lines are manufactured specifically for GKTECH and they comply...
32,85 €
S14/S15 200sx braided brake lines (Front &...
The GKTECH braided brake lines are a direct replacement of the factory lines and are stronger (read: more reliable) than the factory rubber lines which are prone to breaking but they also eliminate the spongy feel of the standard brake lines. The front lines are also longer to compensate for big brake setups or cars with more steering lock (which would...
105,00 €
HFM 324mm R33/R34 GTR 2 piece slotted...
The HFM R33/R34 GTR front slotted rotors are a direct replacement of the OEM rotors and are slotted to help avoid brake fade. In addition the two piece floating hat and rotor offers a significant weight saving which also allows the rotors to expand & contract with changes in temperature, rotational mass and dissipate heat quickly.Saves over 1kg each...
460,80 €
HFM 324mm R33/R34 GTR front slotted rotors...
The HFM R33/R34 GTR front slotted rotors are a direct replacement of the OEM rotors and are slotted to help avoid brake fade. Vehicle Compatibility:- Nissan Skyline R33 GTR- Nissan Skyline R34 GTR
249,99 €
V2 Hydraulic Handbrake assembly + Carbon...
The GKTECH V2 hydraulic handbrake assembly is a pull type to be located in front of the shifter (towards the front of the car). With the carbon fibre handbrake handles the whole unit is lightweight although very strong after a significant amount of FEA to ensure loads were evenly distributed across the handbrake assembly. With the handles available in a...
264,00 €
S13/180sx subframe weld in reinforcement...
S13 subframe weld in reinforcement plates help to reinforce your subframe where it needs it most. Laser cut, steel and dimple died for strength these plates make reinforcement of the rear subframe a heap easier. Vehicle Compatibility: - Nissan 180sx - Nissan S13 Silvia
61,20 €
S13/180sx/S14/S15 K frame/castor rod bar
The gktech K frame/castor rod bar is designed to strengthen the chassis and improve transient response by connecting the tension/castor rods. The K frame bracket reduces movement of the tension/castor rods and the lower control arms during hard cornering where handling and steering will be improved. Vehicle Compatibility: - Nissan 180sx - Nissan S13...
62,00 €
S14/S15/R33/R34 subframe weld in...
S14/S15/R33/R34 subframe weld in reinforcement plates help to reinforce your subframe where it needs it most. Laser cut, steel and dimple died for strength these plates make reinforcement of the rear subframe a heap easier. Vehicle Compatibility: - Nissan S14 200sx - Nissan S15 200sx - Nissan R33 GTS-T Skyline - Nissan R34 GT-T Skyline
67,99 €
‹
›
Skladom
Skladom
Out of stock
In Stock
In Stock
Offset castor rod bush inserts
The GKTECH Billet Aluminum offset castor rod end inserts replace the inserts that go into the rose joint of your castor rod and give around 10mm more wheel clearance by moving the castor rod over. These are an easy DIY direct replacement that shouldn't take longer than 10-15 minutes to install. - To suit rose joints that measure 18mm internal diameter and...
22,68 €
S-chassis offset strut tops
The GKTECH offset strut mounts allow for additional adjustment for those with longer LCA's than standard or if you want to adjust castor.
270,00 €
V2 4130 high tensile steel steering rack...
The GKTECH V2 high tensile 4130 zinc coated tie rod extenders screw on to the end of either standard or aftermarket tie rods and allow the tie rods to travel further into the steering rack which creates more steering lock. Great for drift or getting out of parking spots. Can be used either with or without the extra washer (included) to offer a grand total...
31,68 €
V3 - S13/180sx/R32/A31 caster arms
Caster arms (aka tension rods) allow adjustment in vehicle castor to bring the wheels forward and increase steering response. In general, the more caster the better. Allowing sharper turn in and faster return to the straight position when letting go of the wheel.
215,00 €
V3 - S14/S15/R33/R34 caster arms
Caster arms (aka tension rods) allow adjustment in vehicle castor to bring the wheels forward and increase steering response. In general, the more caster the better. Allowing sharper turn in and faster return to the straight position when letting go of the wheel.
215,00 €
‹
›
In Stock
Skladom
Skladom
Skladom
Skladom
HFM 264° SR20DET CAM SHAFTS – S13, S14, S15
HFM have developed an excellent all round hydraulic forged cam shaft. Aggressive high ramp duration profile for added rpm. Slightly lumpy on idle with excellent power range from mid to top end. A simple drop in mod that will give great power gains. Advanced duration = 264°Duration @ 0.50 = 216°/216°11.9mm Valve liftManufactured from AISI 4140 heat treated...
403,20 €
Nissan 1.3kg/cm2 high pressure radiator cap
The GKTECH 1.3kg/cm2 high pressure radiator cap is a direct fit for all Nissans and raises the pressure in the coolant system to 1.3kg/cm2 (from 0.9 for most Nissans). Extra pressure allows for a higher boiling point = better cooling. NOTE: Do NOT remove your radiator cap while your car is hot. Vehicle Compatibility: - Nissan 180sx - Nissan S13 Silvia -...
10,80 €
S13 Silvia / 180sx Replacement Overflow...
One of the most common problems with S13 silvias and 180sx's is cracked overflow bottles. GKTECH have made these to the highest standards and to be a direct replacement of your standard overflow bottle. Our overflow bottles are stronger than factory and are guaranteed to last the test of time! - 100% direct replacement of your standard overflow bottle -...
30,00 €
S13/180sx Radiator Cooling Panel
The GKTECH air diversion panels sit between your front bumper and the radiator support and not only make your engine bay look cleaner they also serve a purpose. The air diversion panels help to direct air into the radiator as opposed to around it and you will see a drop in water temperatures on the track (nothing to write home about but it all adds up)...
78,00 €
SR20DET Blow Off Valve return blocker
The SR20DET Blow Off Valve return blocker fits all S13, S14 and S15's and is to be used on the intake pipe when the standard blow off valve is removed. If the hole left from removing the blow off valve isn't removed, air will get sucked into the intake after the air flow meter and the car will run very rough. - 1 piece billet aluminium construction -...
11,58 €
Z našej ponuky
V2 Hydraulic Handbrake assembly + Carbon...
The GKTECH V2 hydraulic handbrake assembly is a pull type to be located in front of the shifter (towards the front of the car). With the carbon fibre handbrake handles the whole unit is lightweight although very strong after a significant amount of FEA to ensure loads were evenly distributed across the handbrake assembly. With the handles available in a...
264,00 €
HFM 324mm R33/R34 GTR 2 piece slotted...
The HFM R33/R34 GTR front slotted rotors are a direct replacement of the OEM rotors and are slotted to help avoid brake fade. In addition the two piece floating hat and rotor offers a significant weight saving which also allows the rotors to expand & contract with changes in temperature, rotational mass and dissipate heat quickly.Saves over 1kg each...
460,80 €
HFM 324mm R33/R34 GTR front slotted rotors...
The HFM R33/R34 GTR front slotted rotors are a direct replacement of the OEM rotors and are slotted to help avoid brake fade. Vehicle Compatibility:- Nissan Skyline R33 GTR- Nissan Skyline R34 GTR
249,99 €
‹
›
Skladom
Skladom
Skladom
Skladom
In Stock
S13/180sx Radiator Cooling Panel
The GKTECH air diversion panels sit between your front bumper and the radiator support and not only make your engine bay look cleaner they also serve a purpose. The air diversion panels help to direct air into the radiator as opposed to around it and you will see a drop in water temperatures on the track (nothing to write home about but it all adds up)...
78,00 €
S13 Silvia / 180sx Replacement Overflow...
One of the most common problems with S13 silvias and 180sx's is cracked overflow bottles. GKTECH have made these to the highest standards and to be a direct replacement of your standard overflow bottle. Our overflow bottles are stronger than factory and are guaranteed to last the test of time! - 100% direct replacement of your standard overflow bottle -...
30,00 €
SR20DET Blow Off Valve return blocker
The SR20DET Blow Off Valve return blocker fits all S13, S14 and S15's and is to be used on the intake pipe when the standard blow off valve is removed. If the hole left from removing the blow off valve isn't removed, air will get sucked into the intake after the air flow meter and the car will run very rough. - 1 piece billet aluminium construction -...
11,58 €
Nissan 1.3kg/cm2 high pressure radiator cap
The GKTECH 1.3kg/cm2 high pressure radiator cap is a direct fit for all Nissans and raises the pressure in the coolant system to 1.3kg/cm2 (from 0.9 for most Nissans). Extra pressure allows for a higher boiling point = better cooling. NOTE: Do NOT remove your radiator cap while your car is hot. Vehicle Compatibility: - Nissan 180sx - Nissan S13 Silvia -...
10,80 €
HFM 264° SR20DET CAM SHAFTS – S13, S14, S15
HFM have developed an excellent all round hydraulic forged cam shaft. Aggressive high ramp duration profile for added rpm. Slightly lumpy on idle with excellent power range from mid to top end. A simple drop in mod that will give great power gains. Advanced duration = 264°Duration @ 0.50 = 216°/216°11.9mm Valve liftManufactured from AISI 4140 heat treated...
403,20 €
