Zoznam produktov podľa výrobcu: GK Tech

na stranu
The GKTECH CA18/SR20 solid engine mounts are a direct replacement of the standard item and helps reduce engine movement and get power to the ground. Particularly useful in a drift car where the car is off and on the throttle.
72,00 €
Skladom
The GKTECH camber arms are a direct replacement of the standard items and are critical to correct camber. These camber arms allow for approximately -3/+3 degrees of camber adjustment.
215,00 €
Skladom
Rear traction rods allow adjustment of the rear multi-link suspension. They can be adjusted to eliminate bump steer and alter other rear suspension traction settings to improve suspension response. The lengths on these arms are fully adjustable and with the right adjustments, you can change the position and pitch of which the suspension rotates on, along...
188,00 €
Skladom
Rear toe arms give you the ability to adjust and tune your vehicle's rear toe. The lengths on these rear toe arms are fully adjustable to your specs when doing an alignment and with the right adjustments, straight line and cornering of your vehicle will be improved.
214,00 €
Skladom
Rear toe arms give you the ability to adjust and tune your vehicle's rear toe. The lengths on these rear toe arms are fully adjustable to your specs when doing an alignment and with the right adjustments, straight line and cornering of your vehicle will be improved.
214,00 €
Skladom
Špecifikácie: - 13.0mm drážkovanie - +20mm dĺžka oproti sérií - M12x1.25 závit - Vysoký stupeň tvrdosti 10.9 štifty - Predáva sa ako balenie po 10ks
33,00 €
Skladom
Špecifikácie: - 14.3mm drážkovanie - +20mm dĺžka oproti sérií - M12x1.25 závit - Vysoký stupeň tvrdosti 10.9 štifty - Predáva sa ako balenie po 10ks
33,00 €
Skladom
The GKTECH 4 to 5 stud wheel adapters allow a 4 stud car to fit 5 stud wheels. Sold as a pair these wheel adapters bolt on to your standard hub just like a normal wheel spacer however 1 of your standard studs is then replaced with a longer stud which runs through the adapter and acts as the 5th stud. The wheel adapters are hub centric to suit Nissans...
109,60 €
Skladom
Features: - CNC machined aluminium T6-6061 construction - Hub centric to suit 66.1mm Nissan hubs - 114.3mm PCD with both 4 bolt and 5 bolt holes - Sold as a PAIR
49,80 €
Skladom
The GKTECH high tensile 4130 zinc coated offset tie rod extenders screw on to the end of either standard or aftermarket tie rods and allow the tie rods to travel further into the steering rack which creates more steering lock with the added bonus of moving the tie rod position forward 25mm's which helps reduce steering bind.
75,95 €
Nie je skladom
Do košíka
Features: - CNC machined aluminium T6-6061 construction - Hub centric to suit 66.1mm Nissan hubs - 114.3mm PCD with both 4 bolt and 5 bolt holes - Sold as a PAIR
59,65 €
Skladom
Zobraziť 1 - 12 z 53 položiek